I'll show you the process flow of the carat tube equipment.

Release time：2018-10-22 13:40

The 190 L Especially in the structural design, the welding joint of the plain material belt is covered by the coated supporting pipe, which also improves the quality of the welding joint of the pipe and the overall anti-pressure ability of the product.

Main production process:
L-winding: Hot-winding forming process melting state of HDPE plain belt and PP-coated circular reinforcing rib winding on the steel mold heated to a predetermined temperature, cutting: bearing, socket molding according to a fixed size, demoulding: pipe from the mold, dressing: to make the appearance of smooth specification fuse, embedded: socket embedded electric fuse The HDPE high density polyethylene pipe refers to: Product name: High density polyethylene (HDPE) winding reinforcement pipe (hereinafter referred to as: winding reinforcement pipe) adopts standard: the pipe must conform to GB / T19472.2-2004 stipulation B structure wall pipe; Connection mode: Adopt socket and socket; Winding pipe with electric melting connection. HDPE double-wall corrugated pipe described in this paper refers to: product name: high-density polyethylene (HDPE) double-wall corrugated pipe (hereinafter referred to as: double-wall corrugated pipe); the adoption of standards: pipe must conform to the requirements of GB / T19472.1-2004 B structure wall pipe; connection mode: tight plug-in packing connection.
Comparison of production processes
Clark pipe equipment is the whole process of computer-controlled thermal winding and natural wind rolling cooling, structural wall without internal stress, no welds, pipe wall thickness uniform. The large diameter pipe produced by winding molding mainly produces DN300mm - DN4000mm, which is strengthened by spiral ribbed pipe, thus greatly increasing the ring stiffness of the pipe. Ring stiffness is more than 20 KN / m2, and the ring stiffness can be continuously adjusted according to the engineering requirements, the maximum depth of burial can reach 20 m.
The double wall bellows are pipes which are directly extruded through two concentric tube embryos and are molded by suction. The carat tube equipment is an extrusion process. When the diameter of extruded pipe is proportional to the die of the equipment, the equipment becomes a technical problem and the production cost is increased.
Qingdao Kefengyuan Plastic Machinery Co., Ltd. is located in the beautiful and rich coastal city called "Eastern Switzerland" - Qingdao, covering an area of 12,000 square meters, beautiful environment, superior geographical location, convenient transportation. Over the past ten years, the company has steadily strengthened its scientific and technological innovations, focusing on the management of foreign markets, is a high-tech enterprise involved in polymer materials, plastic machinery research and development, design and manufacture, production and operation and technical services as one.
The company relies on high-tech, rely on high-quality products, perfect service to create good economic and social benefits.
The company has developed more than 20 new products, such as environmentally friendly PP super-thick plate production line, PVC wood-plastic plate production line, PE large-caliber gas/water supply pipe production line, PE large-caliber hollow wall winding pipe production line, PP-R pipe unit, plastic buckle board unit, etc., which are well sold in China, and exported to Russia, Southeast Asia, Middle East, Africa and many other countries and countries. Area.
"Honesty is the root, quality is the foundation, creating new products and contributing to the society" is our eternal belief and pursuit. We will continue to create a new situation in the field of plastic machinery with high-quality products and perfect service, so as to achieve the simultaneous growth of company efficiency and social value.
In the new market area, we are willing to work hand in hand with all relevant industries to create a better future.